PVC plastic floor construction is divided into: self-leveling construction and floor paving construction. Paving is divided into: full scraping glue paving and adhesive tape paving. Self-leveling construction is carried out before floor paving. Full scraping glue paving is suitable for kindergarten floors and commercial floors, and adhesive tape paving is suitable for sports floors and dance floors. Full scraping glue paving is divided into: roll paving and sheet paving. The following is only for roll flooring.
PVC floor paving construction process-full scraping glue
Process 1: Pre-paving. Requirements: The ground is solid, sand-free, powder-free, clean and dry, and the height difference within 2 meters is within 2mm or polished and cleaned self-leveling; Material: PVC floor (with roll number);
Method: Lay according to the roll number.
Process 2: Scraping glue. Requirements: Pre-paved floor; Tools: Special scraping board; Materials: PVC floor special glue;
Method: Roll up the whole pre-paved floor to half, pour an appropriate amount of glue on the ground, and scrape it evenly with a scraper.
Process 3: Laying. Requirements: The glue is not sticky (about 20 minutes after scraping the glue); Tools: Cork board; Method: After the glue is not sticky, roll out the rolled floor, scrape it flat and push it with the cork board; after laying, roll up the other half and scrape the glue to lay it.
Process 4: Trimming. Requirements: The whole piece of floor glue is laid; Tools: Steel ruler, hook knife or wallpaper knife;
Method: After the steel ruler is pressed to the edge, the excess part of the corner is cut off with a hook knife or wallpaper knife; clean up the site.
Process 5: Grooving and connection. Requirements: Laying and trimming are completed; Tools: Steel ruler, groover, welding gun, crescent blade or leveler; Materials: welding wire;
Method: 1. Grooving---Align the steel ruler along the floor joint, and groove with a groover. The length of the groove is controlled at one-third of the total thickness of the floor.
2. Connection---The welding gun connects along the groove position, and after completion, the raised welding line is trimmed with a crescent blade.
Things to note when installing PVC plastic floor
During the installation process, the principle of from inside to outside and from large to small should be followed to avoid confusion. Different materials and textures of floors should be installed in different ways to ensure the best effect. Ensure that the construction environment is dry and well ventilated, and avoid moisture and exposure.
Sports plastic flooring is widely used. The Olympic Games and other international competitions all specify the use of sports flooring. Nowadays, primary schools, middle schools, universities, government agencies, units, hospitals, etc. generally have their own sports venues, and the ground materials used are all sports floors.
What are the advantages of PVC plastic sports flooring?
PVC plastic sports flooring is an ideal choice for a variety of indoor sports venues. It is made of high-density PVC material and has the advantages of durability, good elasticity, anti-slip, waterproof, mildew-proof, and easy to clean. Therefore, it is widely used in gyms, badminton halls, gymnasiums, dance rooms, yoga rooms and other places, becoming one of the most popular types of floors at present.
1. Anti-slip
For sports venues, the anti-slip property of the floor is very important. PVC plastic sports flooring adopts an anti-slip design. Even in intense sports, there will be no slipping or falling, which ensures the health of athletes and the smooth progress of the competition.
2. Anti-mildew
PVC plastic sports flooring also has anti-mildew properties. Due to its good waterproof performance, it can remain dry even in a humid environment to avoid mold growth.
3. Waterproof
PVC plastic sports floor also has good waterproof performance. It adopts waterproof structure design, which can resist corrosion and invasion of water and humid environment. The floor can keep dry and clean, ensuring that the venue is neat and beautiful, making people feel comfortable.
4. Easy to clean
PVC plastic sports floor is easy to clean, just wipe it with a damp cloth. Even after the exercise, the sweat and dust left on the floor can be easily cleaned.
In short, the advantages of PVC plastic sports floor are very obvious. It is not only strong and durable, but also can adapt to a variety of sports venues, allowing sports enthusiasts to exercise in a dry, hygienic, convenient and comfortable venue.
PVC plastic flooring colorful, and has a fireproof, waterproof, non-slip, sound absorption and noise reduction, comfortable feet, easy to clean and other advantages. But scientific cleaning and maintenance can not only make the floor colorful, but also extend the service life .
Step 1: First, all the stains on the PVC plastic flooring thoroughly cleaned.
Step 2: PVC plastic floor special cleaner (please use in accordance with the instructions) sprinkled on the floor, first with a waxing machine will be ground off the dirt on the floor, and then with a dry mop will be dirty water mopping clean, and then wipe the floor with water. (If you don't have a waxer, you can also use other tools instead and carefully grind off the dirt).
Step 3:. After waiting for it to come clean, pour the water-based wax into a clean dry mop and apply the wax evenly to the floor.
Step 4: About 20 minutes after waxing, let the floor surface air dry, wait until it is dry before stepping on it, you can use an electric fan to assist in blowing dry, shorten the time, generally about a few hours after waxing can be completely dry. If you want to move heavy objects must wait until the wax is completely dry before moving, so that you can keep the floor bright.
The above four steps for the general cleaning method, if the PVC plastic flooring after a period of time, waxing many times after the surface of the floor yellow and have to re-waxing, you need to deal with wax remover, the method is as follows:
（1）Spray the wax remover evenly on the place where you want to remove the wax according to the proportion of use, about 10-30 minutes, after the wax remover penetrates into the floor, brush the floor with water (without waxing machine), you need to remove the wax completely, otherwise the re-waxing will not be bright.
（2）After wax removal, please follow steps 1-4 again for cleaning and maintenance.
Today's sports world is full of turnover. Accurately calculating the lifecycle cost of your sports surface depends on a combination of factors, including investment in installation and maintenance
Accurately calculating the life cycle cost of a sports floor becomes an important part of the product selection process. We know that operators of all types of sports and recreational facilities, from professional gymnasiums to collegiate stadiums, ask the question: "How much is this going to cost me in the long run?
It's popular for its quick installation, very low maintenance and ability to withstand harsh weather, making it ideal for use on outdoor basketball courts.
Wooden floors cost more to install than PVC sports floors, but the image of a gleaming hardwood court alone could make it the material of choice for most operators. The conventional wisdom is that if an organisation has enough money, it is likely to opt for a wooden floor.
One of the biggest attractions of PVC sports flooring is its ability to mimic the aesthetics of a traditional hardwood court, but at a much lower price.
However, it's worth noting that the cost of each layer of flooring will eventually equalise over its lifetime, taking into account resurfacing and replacement. This brings us to the next factor to consider:
The intended use of a floor will dictate its maintenance requirements.
No one can deny the versatility of PVC sports floors. You do not need to baby a PVC sports floor as much as you would a wood floor, but it is still a floor.
For most PVC sports floors, you can use an autoscrubber or mop. This means scrubbing once a week. Quarterly or annually with a specific cleaning product.
On a wooden floor, you need to make sure you wear the right sports shoes to avoid scuff marks.
Because wood is porous and naturally absorbs and releases moisture, it requires extra care. You should never use a power scrubber on a wooden sports floor! Spills and moisture on wooden floors need to be wiped up immediately, heel marks removed and the HVAC system carefully monitored. Indoor relative humidity is between 35% and 50% all year round. Annual screening and refinishing is also required.
In general, it should be resurfaced approximately every 5 years. If your court gets a lot of use, such as on a college campus, you may need to resurface sooner, or you can extend the time frame if the court has only a few people shooting baskets.
PVC sports floors can last between 8 and 10 years. With proper maintenance, PVC sports floors can last up to 15 years.
Stands by the industry life expectancy standard of 40-60 years for solid wood sports floors.
Roughly once every 7-10 years, a maple sports floor will need to be sanded. This involves stripping the floor down to bare wood and adding new game lines and logos before sealing and finish.
It's important to bear these differences in mind when choosing between PVC sports floors and hardwood floors for your sports hall. Both are excellent options and whichever you choose will provide an excellent surface for your athletes to train and play on for years to come.
When considering vinyl flooring for a basketball court, the focus should be on finding a product that offers the right balance of performance, durability, and maintenance. Here are some top considerations and recommendations:
1. **Shock Absorption**: Ensures player safety by reducing the impact on joints and muscles.
2. **Ball Bounce**: Needs to provide a consistent and reliable bounce for optimal gameplay.
3. **Traction**: Important for preventing slips and ensuring quick movements.
4. **Durability**: Must withstand high traffic and potential impacts from sports equipment.
5. **Maintenance**: Should be easy to clean and maintain over time.
6. **Aesthetic Appeal**: Should offer a professional appearance that resembles traditional hardwood courts.
**Farfly sports flooring**:
- **Features**: High shock absorption, excellent ball bounce, slip-resistant surface.
- **Durability**: Extremely durable and designed specifically for multi-sport use, including basketball.
- **Maintenance**: Easy to clean and maintain with regular sweeping and mopping.
- **Aesthetics**: Available in a variety of colors and designs that can mimic hardwood floors.
The best vinyl basketball floor to install depends on your specific needs, including budget, usage frequency, and aesthetic preferences. However, **Farfly sports flooring** are often considered top choices for their high performance and durability in sports environments.
When selecting a vinyl floor, ensure it meets all safety standards and provides the necessary features for a high-quality basketball playing experience. Additionally, consulting with flooring professionals and reviewing case studies of similar installations can provide further guidance in making the best choice for your facility.
When considering flooring options, the size and installation method are critical factors that determine suitability. A common question regarding PVC flooring is whether it can be customized to a 3X4 meter size. Due to production equipment limitations, the maximum width for a single piece of PVC flooring is typically 2 meters. Therefore, producing a single 3X4 meter piece of PVC flooring is not feasible. However, this requirement can still be met by using a welding technique.
The production process of PVC flooring involves advanced machinery with strict specifications. Most commonly available PVC flooring production lines have a maximum width capacity of 2 meters. This means that a single piece of PVC flooring cannot exceed this width. Consequently, directly producing a 3X4 meter flooring piece is not possible with current equipment.
Although the maximum width of a single PVC flooring piece is 2 meters, professional welding techniques can seamlessly join multiple pieces to achieve larger dimensions. The welded flooring not only appears seamless but also maintains the same functionality and durability as a single piece. Here are some key advantages of welded PVC flooring:
1. Seamless Appearance:
- Professional welding techniques can make the seams between flooring pieces nearly invisible, ensuring a uniform and aesthetically pleasing look. This is particularly important for large spaces such as exhibition halls and sports arenas.
2. Enhanced Durability:
- Welding not only joins the flooring pieces but also enhances their durability and tensile strength, making the flooring more robust and long-lasting.
3. Water and Dust Resistance:
- Welded flooring has excellent water and dust resistance, helping to maintain cleanliness and hygiene. This is especially beneficial in environments with high sanitary requirements, such as hospitals and laboratories.
4. Flexibility:
- Welding allows for flexible adjustment of flooring dimensions and shapes according to specific needs, accommodating various unique installation requirements.
To ensure that the welded PVC flooring meets expected standards, here are some important considerations during the welding process:
1. Professional Equipment and Technicians:
- The welding process requires specialized equipment and experienced technicians to ensure the quality and effectiveness of the welds.
2. Clean and Flat Surface:
- The flooring surface must be clean and flat before welding to prevent impurities from affecting the weld quality.
3. Controlled Welding Temperature and Speed:
- Proper control of welding temperature and speed is crucial. Incorrect temperature or speed can compromise the quality of the weld.
4. Regular Inspection and Maintenance:
- Welded flooring should undergo regular inspection and maintenance to ensure its long-term stability and aesthetic appeal.
While PVC flooring cannot be directly produced in a 3X4 meter size, welding techniques can achieve this requirement and ensure that the welded flooring meets high standards in aesthetics, durability, and functionality. By choosing professional welding services, you can satisfy the need for large-sized flooring and receive a high-quality flooring solution. Therefore, if you need customized large-size PVC flooring, welding is undoubtedly an ideal choice.
Badminton is a popular sport, and a good indoor badminton court floor is vital for the performance and health of the players. Choosing the right badminton court flooring not only enhances the quality of play but also effectively reduces sports injuries. In this article, we will explore several common types of indoor badminton court flooring and their advantages and disadvantages to help you make an informed choice.
Common Types of Indoor Badminton Court Flooring
1. Vinyl Badminton Carpet
Advantages:
- Good Cushioning Performance: PVC flooring has excellent elasticity and cushioning, which can effectively reduce pressure and fatigue on athletes' joints.
- Strong Anti-slip Properties: High-quality PVC flooring has a special surface texture designed to provide excellent anti-slip performance, reducing the risk of falls.
- Easy Maintenance: PVC flooring is easy to clean and maintain, has a long service life, and is cost-effective.
Disadvantages:
- Installation Complexity: Installing PVC flooring requires professional skills; improper installation can affect its performance.
- Environmental Concerns: Low-quality PVC flooring may contain harmful substances that could pose risks to both the environment and human health.
2. Wooden Flooring
Advantages:
- Natural and Aesthetic Appeal: Wooden floors have a natural texture and color, offering a beautiful and elegant appearance that enhances the venue's overall quality.
- Comfortable Feel: Wooden flooring provides moderate elasticity and a comfortable feel underfoot, offering a good sporting experience.
- Strong Durability: High-quality solid wood flooring is highly durable and long-lasting, capable of withstanding frequent use.
Disadvantages:
- High Maintenance Costs: Wooden floors require regular maintenance and upkeep, which can be costly.
- Susceptibility to Environmental Factors: Wooden flooring can be affected by changes in humidity and temperature, potentially leading to deformation or cracking.
3. Laminate Flooring
Advantages:
- Stable Performance: Laminate flooring consists of multiple layers of material, offering a stable structure that resists deformation.
- Ease of Installation: Laminate flooring is relatively easy to install and does not require particularly complex techniques.
- Variety of Choices: Laminate flooring comes in various surface patterns and colors, allowing you to select the style that best suits your needs.
Disadvantages:
- Average Cushioning: Compared to PVC and wooden flooring, laminate flooring has slightly inferior elasticity and cushioning performance.
- Limited Environmental Performance: Some laminate flooring may contain formaldehyde and other harmful substances; it is essential to check for environmental certifications.
Precautions When Choosing Flooring
1. Safety
Safety is the primary consideration when choosing badminton court flooring. The floor should have excellent non-slip performance to effectively prevent athletes from slipping and falling. Additionally, the floor's cushioning performance is crucial to reduce the impact on joints and prevent injuries.
2. Durability
Badminton court flooring needs to withstand frequent use and wear and tear, so durability is an important factor. Choosing a durable flooring material can extend the court's lifespan and reduce the frequency and cost of replacements and maintenance.
3. Environmental Friendliness
Environmental performance is a growing concern. Choosing flooring made of environmentally friendly materials not only protects the environment but also safeguards athletes' health. When purchasing flooring, check for relevant environmental protection certifications.
4. Economy
Economy is also a factor to consider when choosing flooring. Ensuring quality and performance while selecting cost-effective materials can help control costs. Consider the initial purchase cost, installation cost, and maintenance cost comprehensively.
Conclusion
The choice of indoor badminton court flooring is directly related to athletes' performance and safety. By analyzing the advantages and disadvantages of PVC flooring, wooden flooring, laminate flooring, and vinyl badminton carpet, the best choice can be made according to specific needs and conditions. Regardless of which type of flooring is chosen, priority should be given to safety, durability, environmental friendliness, and economy to create a high-quality badminton court and provide athletes with an excellent sporting experience.
Homogeneous Plastic Flooring
Definition: Single layer of uniform material, typically vinyl.
Advantages:Durability: Withstands heavy foot traffic and wear.
Maintenance: Easy to clean and disinfect.
Cost-Effective: Long-lasting with low maintenance costs.
Seamless Appearance: Minimizes areas where dirt and germs can accumulate.
Disadvantages: Design Options: Limited aesthetics.
Heterogeneous Plastic Flooring
Definition: Multiple layers, including wear, design, and backing layers, etc.
Advantages: Design Flexibility: Wide range of colors, patterns, and textures.
Comfort: Enhanced underfoot comfort and acoustic properties.
Functional Layers: Improved slip resistance and sound insulation.
Disadvantages:Durability: Less durable due to multiple layers.
Maintenance: More challenging to maintain and repair.
Cost: Cost savings can be achieved.
Key Considerations for Healthcare Settings
Infection Control:
Homogeneous: Preferred for critical areas due to seamless, easy-to-disinfect surface.
Heterogeneous: Newer products also meet hygiene standards.
Aesthetics:
Heterogeneous: Greater design options for a therapeutic environment.
Budget:
Homogeneous: Lower initial cost and longer lifespan.
Heterogeneous: The product of choice for projects with limited budgets!
Conclusion
Homogeneous Flooring: Best for high-traffic, infection-sensitive areas.
Heterogeneous Flooring: Ideal for design-oriented areas.
Add : No.5 Huaqing Intelligent Park, Huishan District, Wuxi, Jiangsu, China
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Copyright © 2024 WUXI TEFA DECORATION MATERIAL CO., LTD. All Rights Reserved.
Sitemap | Blog | Xml | Privacy Policy
Network Supported
English
français
español
português
العربية