FAQ & Releted Reading

　　There are several differences between recycled and virgin Spc locking flooring:

　　First of all, the quality, the new material is usually better quality, stability, durability and strength, can withstand greater pressure and wear and tear, the service life is relatively long. Recycled material due to recycling in the processing, its quality may fluctuate, stability and durability is not as good as the new material.

　　Secondly, in the environmental performance, although the use of recycled materials to help recycle resources, has a certain environmental significance, but in some parts of the processing may not be as environmentally friendly as the new material. New material in the production process can be better control of environmental indicators to reduce the impact on the environment.

　　Further is the appearance of performance, newborn material made of SPC locking floor color is more uniform, pure, surface texture is also more delicate and smooth, recycled material floor in the color and texture may be inferior.

　　Finally, the price, in general, the cost of recycled material is relatively low, so the use of recycled material SPC locking floor price is often cheaper than the use of new material floor.

　　In short: SPC locking floor of recycled material and new material in the quality, environmental protection, appearance and price are more obvious differences, consumers can choose according to their own needs and budget to decide.

Maintaining a clean and hygienic environment in hospitals is crucial for patient safety and infection control. Here are the recommended procedures and methods for cleaning homogeneous vinyl flooring in a hospital setting:

Daily Cleaning Procedures

Dust and Debris Removal

Sweep or Vacuum: Use a dust mop or vacuum with a soft brush attachment to remove loose dirt, dust, and debris. Ensure all corners and edges are thoroughly cleaned.

Wet Mopping

Prepare Cleaning Solution: Use a neutral pH floor cleaner mixed with water according to the manufacturer's instructions.

Mop the Floor: Use a damp mop to clean the floor, making sure not to over-wet the surface. Use a microfiber mop for better dirt capture and reduced water usage.

Rinse Mop Frequently: Rinse the mop frequently in clean water to avoid spreading dirt.

Monthly or Quarterly Cleaning Procedures

Deep Cleaning

Scrub the Floor: Use an automatic scrubber with a red or blue scrubbing pad for more thorough cleaning. This is especially important in high-traffic areas.

Clean Corners and Edges: Use a hand brush or a small scrubber to clean areas that the automatic scrubber cannot reach.

Disinfection

Apply Disinfectant: After scrubbing, apply a hospital-grade disinfectant solution. Follow the manufacturer's instructions for dilution and contact time.

Rinse Thoroughly: Rinse the floor with clean water to remove any residual disinfectant.

Special Considerations

Spill Management

Immediate Clean-Up: Clean up spills immediately to prevent staining and potential slip hazards. Use absorbent cloths or mops.

Use Appropriate Cleaners: For chemical spills or bodily fluids, use the appropriate cleaner and disinfectant to ensure thorough decontamination.

Stain Removal

Spot Cleaning: For stains, use a suitable spot cleaner. Apply the cleaner to a cloth and gently rub the stain. Avoid harsh chemicals that could damage the floor.

Equipment and Supplies

Mops and Buckets: Use color-coded mops and buckets to prevent cross-contamination.

Automatic Scrubbers: Ensure the scrubbers are in good working condition and the pads are replaced regularly.

Cleaning Solutions: Use neutral pH cleaners and hospital-grade disinfectants that are compatible with homogeneous vinyl flooring.

Best Practices

Training: Ensure all cleaning staff are trained on the proper use of equipment, cleaning solutions, and procedures.

Safety: Use appropriate personal protective equipment (PPE) such as gloves and safety goggles when handling cleaning chemicals.

Documentation: Keep records of cleaning schedules and procedures to ensure compliance with hospital hygiene standards.

By following these procedures and methods, hospitals can maintain the cleanliness and hygiene of homogeneous vinyl flooring, ensuring a safe environment for patients, staff, and visitors.

Homogeneous vinyl flooring is a type of resilient flooring made from a single layer of vinyl. Here are some key features:

Uniform Composition: The flooring is composed of a single, uniform layer, ensuring consistent color and pattern throughout its thickness. This makes any wear or damage less noticeable over time.

Durability: It is highly durable and suitable for high-traffic areas. The uniform structure enhances its wear resistance.

Maintenance: It is easy to clean and maintain, often requiring just regular sweeping and mopping. It is also resistant to stains and spills.

Installation: Homogeneous vinyl flooring can be installed in various settings, including commercial, healthcare, and educational facilities. It often requires professional installation to ensure proper adhesion and performance.

Resistant to bacteria and mold: Due to its seamless nature, it is easier to keep clean and is resistant to bacteria and mold, making it ideal for settings requiring high hygiene standards.

Design Variety: Available in a wide range of colors and patterns, it can be tailored to fit different aesthetic preferences and functional needs.

Applications

Homogeneous vinyl flooring is versatile and used in various settings due to its durability, ease of maintenance, and aesthetic flexibility. Here are some common applications:

Healthcare Facilities:

Hospitals and Clinics: Its seamless surface is easy to clean, which helps maintain high hygiene standards. It is also resistant to stains and chemicals commonly used in healthcare environments.

Laboratories: Offers a clean, durable surface that can withstand chemical spills and heavy equipment.

Product recommendation: Farfly's Bonaire line of products

Educational Institutions:

Schools and Universities: Its durability makes it suitable for high-traffic areas like hallways, classrooms, and cafeterias.

Daycare Centers: Provides a safe, easy-to-clean surface for young children to play on.

Commercial Spaces:

Offices: Homogeneous vinyl flooring is often used in office spaces for its professional appearance and ability to withstand heavy foot traffic.

Retail Stores: Its variety of design options allows for customization to match branding and interior design themes.

Public Buildings:

Government Buildings: Used in hallways, lobbies, and other public areas.

Hospitality:

Hotels: Used in corridors, lobbies, and other high-traffic areas due to its durability and aesthetic versatility.

Restaurants: Provides a durable, easy-to-clean surface that can handle spills and heavy foot traffic.

Industrial Settings:

Factories and Warehouses: Its durability and resistance to chemicals and heavy equipment make it suitable for industrial use.

These varied applications highlight the versatility and practicality of homogeneous vinyl flooring in different environments.

To learn about Homogeneous vinyl flooring products go to the Catalog Center!

Hospitals require flooring that meets strict standards of hygiene, durability, safety and ease of maintenance. The following are common types of flooring used in hospitals:

Vinyl flooring:

Homogeneous vinyl flooring: Durable, easy to maintain and ideal for high traffic areas. Ideal for reception areas, corridors, wards, operating theatres and more.

Luxury vinyl tile (LVT): Flexible in design, durable and easy to maintain, suitable for use in medical offices.

Rubber Flooring:

Non-slip and provides cushioning to reduce fatigue for healthcare workers. Easy to clean and resistant to stains and chemicals.

PVC commercial flooring:

Made from natural materials, it is environmentally friendly, durable and easy to maintain. Can be antibacterial, helping to reduce the spread of germs.

Ceramic and porcelain tiles:

Used in areas such as bathrooms and toilets. Easy to clean and maintain.

Considerations for hospital flooring

Infection control: Floors need to be easy to clean and disinfect, with minimal seams to prevent the growth of bacteria and fungi.

Slip resistance: Ensure patient and staff safety, especially in wet areas.

Durability: Must be able to withstand heavy foot traffic, equipment movement and frequent cleaning.

Comfort: Provides some cushioning to reduce fatigue for staff who are on their feet for long periods of time.

Noise reduction: Helps create a quiet environment conducive to patient recovery.

Combined with these recommendations, the most suitable flooring for hospitals is homogeneous vinyl flooring.

PVC flooring is a paving more convenient floor decoration materials, that is, paving that is used for different floors, PVC flooring paving requirements are not the same.

General requirements.

In order to pave successfully, please be sure to carefully check your current stage of the ground, to ensure that all the ground must be neat, smooth, hard, dry and no gaps.

Specifics for different floors:

Cement floor: make sure it is neat and not wet and cold (if the floor is painted, remove all the paint), and repair all the gaps and rotten holes first.

Wooden floor: to ensure that the original wooden floor neat, clean, no color glaze, no wax, diaphragm vacuum pump, and solid adhesion on the ground, all the gaps with the right amount of filler to make up for the flat.

Stone plastic plate PVC floor: remove all the dirty machine oil or polishing waxed wood floor, try not to lay on the soft plastic or rubber flooring, this kind of wood flooring must be removed or add plywood.

All interior decoration work (including paint) is not completed when not construction laying PVC flooring, unless it is covered maintenance, in order to avoid PVC flooring by environmental pollution or destruction.

PVC floor can not be subjected to rain, not direct sunlight, should be placed in a flat indoor temperature of 20 ℃ above the site.

Newly paved concrete floor, must wait until completely dry before construction, generally must be more than 30 days, such as natural ventilation excellent occasions, but also at least 3 weeks.

Note: PVC flooring construction should be surveyed before the ground, the general moisture content of 40% of the following can be constructed, 40% -60% of the place, it is appropriate to first test pavement, a small area to determine the construction, the moisture content of more than 60% can not be constructed.

Before construction, the ground must be completely cleaned and tidy, if there is unevenness or other bad place, should be ground or scraped, the ground is more serious sand, should be painted again.

In accordance with the standard sketching line of the house building, find out the positioning point, and then use a ruler to measure 90 ° to find out the vertical bisecting line, and then use the bucket line to pop out the datum line.

Wipe the floor glue board should follow the datum line positioning point for the starting point, to the four sides of the datum line gradually to the toothed line steel scraper knife (teeth mouth to be dense and shallow) wipe the water-based glue, about 20-30 minutes to lay the PVC flooring, wipe the total area of the ratio of about one hour can be affixed to the appropriate, wipe to be sure to be well proportioned, and the water-based glue belongs to the semi-sensory pressure of the glue, paste only must be in the PVC flooring on the pressure. It can be.

Water-based adhesive wipe, to be slightly evaporated water (about 20 minutes), to lightly press the hand does not stain the hand as a standard, that is, gradually from the positioning point along the baseline one by one laying PVC flooring, laying PVC flooring to solve the Qi, from the top to the bottom of the placement, and in a piece of PVC flooring around the squeeze, so that a piece of the ground and the ground in line with.

Water-based glue from the interface extrusion molding overflow, please immediately use a wet rag will stick to the wood floor on the glue wash, if you can not immediately wash, wait for drying will be more difficult to solve, please pay special attention. (If the natural environment allows the use of automotive gasoline or paint thinner cleaning)

Around the edge of the end, another piece of PVC flooring placed on the edge of the paved PVC flooring, so that the two pieces of PVC flooring edges thoroughly affixed, and then take another piece of PVC flooring as a gauge, one side of the wall, diagonal with a paper cutter along the edges of the laser cutting, and will be paved on the wall of the ground at the.

Around the edge of the construction, must be completely cleaned up the laser cutting debris, and then extrusion molding along the shore with a roller drum, so that does not fit the edge of the PVC flooring in line with the leveling, and then wash with a wet rag, there is a sticky stain, please use a small amount of adhesive removal liquid carefully eliminated, and then scrubbed neatly with cold water.

Laying is completed, first remove all the dirt, and then waxing maintenance of the surface layer, in order to keep the PVC floor beautiful and durable.

Daily cleanup, cold water mopping to remove can be, in order to better maintain the maintenance of PVC floor surface bright, can be polished and waxed on time, can keep the PVC floor beautiful as new for a long time.

Kindergarten PVC flooring in the end to choose what color? As we all know, the color of the child's happy growth can be said to be very critical, there are experts and scholars have 300 children and young people carried out up to five years of observation and scientific research, for the color of the child's brain development hazards. The final conclusion is that a colorful natural environment encourages children's insight, imagination, memory, and imagination far better than a normal colorful natural environment.

Kindergartens have a significant impact on children's global cognitive abilities, so if they create a colorful interior space for children, it can open the door to their curiosity! What colors should be chosen for the interior of a kindergarten?

Color is divided into two major colors: warm colors such as red, yellow, orange and other colors, can make people create a warm feeling, at a certain level can make small children active logical thinking, reflective dexterity; cold colors such as blue, green, gray and other colors give people a cold feeling, can make people stable emotions, calm and peaceful.

Another must pay attention to is: kindergarten teaching area flooring material color can be moderate floor tile mosaic modeling design, color as far as possible to manipulate within 4 colors, do not have to be overly complicated, because too complicated pattern design will be distracted by the children's concentration.

Same Homogeneous flooring PVC flooring, why there is a gap between the quality and price? Homogeneous and permeable construction is long lasting and durable, the material is flexible and very easy to install, has good wear and stain resistance properties, and is much loved by everyone. So, how to identify the quality of its products when buying?

1, brand awareness

Once the floor is paved to the ground on the need for long-term use, therefore, it is best to pick the user evaluation of the credibility of the better well-known brands. Generally speaking, well-known brands, with better product quality and after-sales service, not only to help deal with laying, but also for customers to deal with such as maintenance, overhaul and other problems.

2, environmental protection non-toxic

The key raw material for manufacturing Homogeneous flooring is the new upgraded polyethylene raw material, polyethylene is a non-toxic renewable energy for environmental protection, for example, it is used in kitchen utensils, medical liquid transportation bags, packaging cartons, etc., and there is no need to worry about its environmental protection.

3、Wear resistance

Ground material wear level is divided into T, P, M, F four levels, in which the T level is the largest, we understand the wear level of the floor tiles for the T level. Homogeneous flooring is a new technology granulation, ultra-high-pressure production and processing of PVC flooring, its wear-resistant to achieve the highest level of T level. In the traditional floor materials in the more wear-resistant strengthen wood flooring wear-resistant only M level.

Homogeneous flooring material is too soft so the elasticity is very good, in the impact of heavy objects have excellent elasticity repair, in addition to have a strong impact resistance, have a strong elasticity repair, not easy to lead to destruction. It can minimize the road surface damage to the body, and can be dispersed on the foot impact, new scientific research data information shows that in the flow of indoor space laid Homogeneous flooring, the proportion of its staff falls and injuries compared with other floors reduced by nearly 70%.

　　A good elevator mat is important for the need to keep it clean, reduce safety hazards and enhance the aesthetics of the elevator interior. Customizing the right size elevator mat is the preferred requirement for the function of an elevator mat. Let's take a look at how to accomplish a custom elevator mat.

　　Small ways to customize elevator mats

　　One: Measure the elevator floor

　　Length and width to be measured: first measure the length and width of the elevator floor. And tape measure for accurate measurement.

　　Doorways and corners should also be taken into account: elevator mats should cover any irregular spaces around doorways and corners.

　　The choice of material:

　　1: Durability: choose materials that are wear-resistant and can withstand high foot traffic.

　　2: Safety features: electric mats with anti-slip properties.

　　3: Appearance: try to go for colors and patterns that match the interior of the elevator.

　　If you have your own ideas:

　　First of all you have to provide the shape and size: provide the size and shape to the producer to make it easier for the producer to go to make a suitable mat for your elevator. But if the shape of your elevator floor is irregular, this requires you to provide detailed information or design drawings.

　　Brand: If you need, you can use LOGO or pattern to customize your exclusive elevator mat.

　　Others: Choose the edge that suits your needs (such as beveled edges) or other properties.

　　View and order:

　　Sample: You can request a sample etc. from the producer to confirm that the customized elevator mat meets your expectations.

　　Order: If your requirements are met, please select the appropriate customization option to place your order.

　　Customized elevator mats are troublesome as long as you take accurate measurements, make good material choices and select the right customization options. After these steps, you are ready to enhance the safety, cleanliness and appearance of your elevator's interior with custom elevator mats just for you.

　　As we all know, we usually use the badminton floor is directly fixed on the ground, if you need to replace it, you need to dismantle and resurface, which will not only cost a lot of manpower and money, but also lead to a period of time can not be able to move in and out of the situation, etc., and removable badminton floor mats in terms of the installation, basically, one person can be completed, which reflects one of the advantages of the removable floor, the Installation is quick and easy. Here to give you a detailed introduction to the removable badminton floor mats have what advantages.

　　Here we say what is the movable badminton floor mat?

　　Removable badminton mats have the same high performance as traditional permanently installed flooring, but with the added advantage of being removable. Often installed using alternative assembly methods such as locking, badminton mats can be assembled and disassembled without the use of glues and adhesives. This ensures a stable floor as well as the high performance required for competitive badminton venues.

　　What are the benefits of removable badminton floor mats

　　Flexibility

　　One of the advantages of removable badminton mats is their flexibility. Because they can be quickly installed and dismantled, they are perfect for multi-purpose venues such as school gyms, sports centers, and community centers.

　　Cost Savings

　　For venues that host multiple sports or events, removable badminton mats are an efficient solution. Because it eliminates the need for a separate area to be used for badminton, the same area can be used for other purposes as well, which not only reduces the need for multiple dedicated courts. It can also save a lot of cost.

　　Easy to install and maintain

　　The installation of removable badminton mats is simple and does not require specialized equipment. Simply follow the instructions to set up and maintenance is also easy, for example, if one of the pieces is damaged, we can replace this panel individually without the need for extensive repairs.

　　High performance and safety

　　Despite the removable nature of these badminton mats, their performance is not discounted in any way. It still provides the best shock absorption, traction and durability, anti-slip and so on.

　　Removable badminton mats can be said to represent a significant advancement in sports flooring technology and also combine high performance, flexibility and low cost. By choosing removable badminton mats, venues can maximize performance and provide badminton enthusiasts with a safe, high-quality playing surface.

　　When installing sports flooring, there's one thing everyone overlooks: humidity. But controlling humidity is important to ensure the longevity, performance and safety of your sports floor. Below, we take a look at why humidity is so important.

　　Why Humidity Matters

　　Humidity can cause irreversible damage to the performance and durability of a sports floor

　　Material Stability: Many sports flooring materials are sensitive to humidity relative to incoming water. Too much humidity can cause the material to expand, and if it's low humidity the material will shrink. Gaps, warping and other structural problems can occur in both cases.

　　Adhesive Performance: Adhesives are used in most sports flooring installations, and adhesives can be substandard due to humidity, which can make the adhesive bond less strong and can cause the sports flooring to separate from the subfloor.

　　SAFETY: Excessive humidity will cause the surface traction of the sports floor to be reduced. This can make the surface slippery and increase the risk of injury. Conversely, too little humidity will dry out the surface, which can cause wear and discomfort.

　　What are the humidity requirements for sports flooring installation

　　First before installation: before installation, stabilize the humidity level of the place where the flooring is to be laid. In most types of sports flooring, the more desirable humidity levels are between 35% and 55%. This range allows the sports flooring material to adapt to the environment.

　　Next, during installation: The humidity level should be maintained consistently during the installation process. If there are sudden changes in humidity during this period, it will reduce the stability of the curing adhesive and the material.

　　Then after installation: After the installation campaign, the humidity range should continue to be monitored and controlled. This will ensure that the floor remains stable and performs well.

PVC plastic floor construction is divided into: self-leveling construction and floor paving construction. Paving is divided into: full scraping glue paving and adhesive tape paving. Self-leveling construction is carried out before floor paving. Full scraping glue paving is suitable for kindergarten floors and commercial floors, and adhesive tape paving is suitable for sports floors and dance floors. Full scraping glue paving is divided into: roll paving and sheet paving. The following is only for roll flooring.

PVC floor paving construction process-full scraping glue

Process 1: Pre-paving. Requirements: The ground is solid, sand-free, powder-free, clean and dry, and the height difference within 2 meters is within 2mm or polished and cleaned self-leveling; Material: PVC floor (with roll number);

Method: Lay according to the roll number.

Process 2: Scraping glue. Requirements: Pre-paved floor; Tools: Special scraping board; Materials: PVC floor special glue;

Method: Roll up the whole pre-paved floor to half, pour an appropriate amount of glue on the ground, and scrape it evenly with a scraper.

Process 3: Laying. Requirements: The glue is not sticky (about 20 minutes after scraping the glue); Tools: Cork board; Method: After the glue is not sticky, roll out the rolled floor, scrape it flat and push it with the cork board; after laying, roll up the other half and scrape the glue to lay it.

Process 4: Trimming. Requirements: The whole piece of floor glue is laid; Tools: Steel ruler, hook knife or wallpaper knife;

Method: After the steel ruler is pressed to the edge, the excess part of the corner is cut off with a hook knife or wallpaper knife; clean up the site.

Process 5: Grooving and connection. Requirements: Laying and trimming are completed; Tools: Steel ruler, groover, welding gun, crescent blade or leveler; Materials: welding wire;

Method: 1. Grooving---Align the steel ruler along the floor joint, and groove with a groover. The length of the groove is controlled at one-third of the total thickness of the floor.

2. Connection---The welding gun connects along the groove position, and after completion, the raised welding line is trimmed with a crescent blade.

Things to note when installing PVC plastic floor

During the installation process, the principle of from inside to outside and from large to small should be followed to avoid confusion. Different materials and textures of floors should be installed in different ways to ensure the best effect. Ensure that the construction environment is dry and well ventilated, and avoid moisture and exposure.

　　Sports plastic flooring is widely used. The Olympic Games and other international competitions all specify the use of sports flooring. Nowadays, primary schools, middle schools, universities, government agencies, units, hospitals, etc. generally have their own sports venues, and the ground materials used are all sports floors.

　　What are the advantages of PVC plastic sports flooring?

　　PVC plastic sports flooring is an ideal choice for a variety of indoor sports venues. It is made of high-density PVC material and has the advantages of durability, good elasticity, anti-slip, waterproof, mildew-proof, and easy to clean. Therefore, it is widely used in gyms, badminton halls, gymnasiums, dance rooms, yoga rooms and other places, becoming one of the most popular types of floors at present.

　　1. Anti-slip

　　For sports venues, the anti-slip property of the floor is very important. PVC plastic sports flooring adopts an anti-slip design. Even in intense sports, there will be no slipping or falling, which ensures the health of athletes and the smooth progress of the competition.

　　2. Anti-mildew

　　PVC plastic sports flooring also has anti-mildew properties. Due to its good waterproof performance, it can remain dry even in a humid environment to avoid mold growth.

　　3. Waterproof

　　PVC plastic sports floor also has good waterproof performance. It adopts waterproof structure design, which can resist corrosion and invasion of water and humid environment. The floor can keep dry and clean, ensuring that the venue is neat and beautiful, making people feel comfortable.

　　4. Easy to clean

　　PVC plastic sports floor is easy to clean, just wipe it with a damp cloth. Even after the exercise, the sweat and dust left on the floor can be easily cleaned.

　　In short, the advantages of PVC plastic sports floor are very obvious. It is not only strong and durable, but also can adapt to a variety of sports venues, allowing sports enthusiasts to exercise in a dry, hygienic, convenient and comfortable venue.