FAQ & Releted Reading

Installing vinyl flooring on a basketball court involves several key steps to ensure a smooth, durable, and professional finish. Here’s a comprehensive guide to the process:

Materials and Tools Needed:

Weld line

Welding torch

Slotter

Adhesive suitable for vinyl flooring

Measuring tape

Utility knife or vinyl cutter

Roller (preferably a heavy-duty one)

Trowel

Chalk line or laser level

Steps for Installation:

Preparation:

Inspect the Subfloor: Ensure the subfloor is smooth, level, dry, and clean. Any imperfections can affect the vinyl installation.

Clean the Subfloor: Remove any dust, dirt, or grease. Use a degreaser if necessary.

Repair the Subfloor: Fill in any cracks or holes with a suitable filler and sand it smooth.

Acclimate the Vinyl: Allow the vinyl flooring to acclimate to the room temperature for at least 24 hours.

Layout Planning:

Measure and Mark: Measure the dimensions of the court and mark the centerlines using a chalk line or laser level. This helps in aligning the vinyl flooring correctly.

Dry Lay the Vinyl: Lay out the vinyl pieces without adhesive to ensure proper fit and alignment. Adjust as necessary.

Applying Adhesive:

Choose the Right Adhesive: Please use special glue (water-based glue) for PVC flooring.

Spread the Adhesive: Using a trowel, spread the adhesive evenly on the subfloor. Work in small sections to prevent the adhesive from drying out before you lay the vinyl.After applying the adhesive, you need to have to wait for the water to evaporate, which is about 30-40 minutes.

Laying the Vinyl:

Start at the Center: Begin laying the vinyl from the center of the court and work your way outwards. This ensures symmetry and reduces visible seams.

Press and Smooth: As you lay each section, press it down firmly and smooth out any air bubbles using a roller. A heavy-duty roller works best for this task.

Trim Excess Vinyl: Use a utility knife or vinyl cutter to trim any excess material around the edges.

Slotting:

The gaps between the floors are cut with a grooving machine to create notches. The depth of the grooves is 2/3 of the floor.

Sealing Seams:

Heat Welding : Heat the welding wire with a soldering gun to soften the wire and embed it in the floor groove. Ensure a seamless link between the floors.

Finishing Touches:

Clean the Surface: Once the adhesive has cured, clean the surface of the vinyl with a suitable floor cleaner to remove any residue.

Maintenance:

Regular Cleaning: Keep the floor clean by regularly sweeping and mopping with a vinyl-safe cleaner.

By following these steps, you can ensure a professional installation of vinyl flooring on a basketball court, providing a durable and aesthetically pleasing playing surface.